In this update we improved the checksum functions by covering the major part of missing checksums of the Ecus and by fixing bugs in the current supported checksums. More Ecus are supported by Hexprog as well. Citroen Valeo V46.11, VD46.1, VD46.13 Opel Valeo VD46.1 Peugeot Valeo V46.11, VD46.1
This version supports more Ecus with MPC5500 and MPC5600 series. Very important Ecus have been added to serve Hexprog users like DCM6.2A and DCM6.2C in PSA and Continental GPEC2x Trucks also has a share in this update, Continental ACM for Renault trucks is available now. Abarth: Marelli 8GMK Alfa Romeo: Magneti Marelli 9GF Chevrolet: ACDelco E98 Chrysler: Continental…
Starting from this version Hexprog users can work with trucks Ecus/Tcus, some important trucks Ecus are supported now. We also added more Ecus from DELCO in boot mode. Trucks Ecus: Ford Truck: Bosch EDC7C1, EDC7C1/C2 Foton Bosch: DCU17, EDC17C55 Freightliner: Continental ACM2, Temic DDEC6 International: Bosch EDC17CV42 Isuzu: Denso 275700-7082 SH72546 ECU and TCU (Boot…
This release supports the Boot Assist Module for MPC5XXX (BAM), this will bring more demanded ecus/tcus to the supported list of Hexprog. Abarth Marelli 8GMF MPC5565 ECU Alfa Romeo Magneti 8GMF MPC5565 Alfa Romeo Bosch ME7.3.2 ST10C167 Alfa Romeo Bosch ME7.3.2, ME7.1.1 ST10C167 Alfa Romeo Bosch MED7.6.1 ST10F275 Alfa Romeo Magneti MJ8DF MPC5565 Chevrolet ACDelco E83…
A new Ecus family has been added to the supported list of Hexprog, this update brings the Ecus equipped with Renesas SH725 series. Hexprog will support these Ecus mainly using boot mode (Jtag connection) and many of these Ecus will be supported in factory mode. Abarth: Bosch ME7.9.10 Audi: TCU Temic DQ200 MQB, Continental Simos…
This update brings more TCUs to Hexprog supported list, we are adding some of TEMIC TCUs for VAG in this release like DQ200, DL382 and VL381, as well as one of the most wanted TCUs, it is BMW EGS in E70 series. BMW ZF 8HP45 has been added in this version in factory mode: read, write…
Starting from this version Hexprog will be able to read/write and clone different Transmissions Control units (TCUs), this version brings BMW ZF 8HP and Continental 6HP to the action. Due to the high demand on VAG DCM6.2 and DCM3.7, Hexprog supports these Ecus starting from this update. BMW ZF 8HP50, 8HP75, 8HP90 factory mode: read, write…
Hexprog 1.0.41 is avialble for users,This version supports Mercedes Benz EDC17X by OBD, it also added support for Hyundai Kia Continental Ecus and Tcus. Mercedes Benz OBD: EDC17C43, EDC17C66, EDC17CP46, EDC17CP57, and EDC17CP60 Read, Virtual read, OBD write, and checksum correction. Audi, VW Boot Mode: Continental Simos 6.2, Simos 6.23, Simos 6.3 . Chevrolet Boot Mode: Ac Delco E86. GMC Boot Mode:…
Hexprog 1.0.40 is avialble for users. In this version we added more Ecus for repairing and tuning by OBD VW, Audi, Skoda and Seat: Added Bosch EDC17CP56 and EDC17CP74, Virtual read, OBD write , CVN correction and checksum correction.
Autohex II BMW Diagnostic software update is available for Autohex BMW users. This update fixes some issues appeared in last release, as well as some minor bugs reported by Autohex II users recently.
Hexprog 1.0.39 is available for users. We still focusing on VAG Ecus by OBD, so we have more Ecus in this version. VW, Audi, Skoda and Seat: SIMOS 18, SIMOS 18.1, SIMOS 18.2, SIMOS 18.4, SIMOS 18.6 Virtual read, OBD write, and checksum correction. VW: EDC17C54 Virtual read, OBD write, and checksum correction. VW, Audi, Skoda and…
Hexprog 1.0.38 is available for users. OBD list is growing especially in the VAG group, this update brings the SIMOS 12.1 and SIMOS 12.2 by OBD, it also adds more Ecus on boot and factory mode. VW, Audi, Skoda and Seat: Added Continental SIMOS 12.1 and SIMOS 12.1 Virtual read, OBD write, and checksum correction, Renault:…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. In this version we included the EGS 8HP function which will enable Autohex II users to read ISN from different models in BMW E,F and G series, as well as resetting ISN from the EGS 8HP. Fixed a fake error message in coding…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. Added FA parsing and modules update calculation support to latest models of BMW and MINI (2021). Updated flash data files for programming and coding data. BDC with latest update unlock is supported in this release. Note: This update requires a large amount of…
Hexprog 1.0.36 is avialble for users. In this version users can work with VAG PCR 2.1 by OBD without the need to patch it by boot mode. VW, Audi, Skoda and Seat: Added Continental PCR 2.1 Virtual read, OBD write , CVN correction and checksum correction, (No need to patch Ecu by boot mode). Corrected…
Hexprog 1.0.34 is avialble for users. In this version we have fixed minor bugs as well as we added EDC17C46. VW, Audi, Skoda and Seat: Added EDC17C46 Virtual Read, OBD Write, and Auto checksum correction. Corrected the timeout problem when writing flash into MPC563 Ecus.
Hexprog 1.0.35 is avialble for users. This update is mainly to enhance the programming in VW, Audi, Skoda and Seat cars as well as to fix some bugs in our checksum functions. Enhanced Ecu programming for VW, Audi, Skoda and Seat (UDS Protocol). Corrected some bugs in Hexprog Checksum functions.
Hexprog has more Ecus to read and write by OBD, this version added 25 Ecus. We added more Ecus for chip tuning by OBD for BMW and VAG. we also fixed some issues in MPC555 Ecus as well as EEPROM with I2C protocol VW, Audi, Skoda and Seat: MED17.1, MED17.1.1 (TC1796), MED17.5, MED17.5.20, MED17.5.5 (TC1766),…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. EGS 8HP for BMW E Series (E70 series) is available in this version. Improved the function of ISN reading from MDG1 Ecus.
Hexprog is able to do chip tuning by OBD for all BMW MEVD17.X.X in E and F series starting from this version. EDC17CXX will be available in Hexprog OBD list in next updates. You can use Virtual Read in HexProg to download the original flash files from our servers, and write the modified flash by OBD using Hexprog. This…
Hexprog software update is available forHextag and Hexprog users. EDC16 Checksum is ready in this version MG1, MD1 Ecus Checksum is available for almost all Ecus in this version Factory mode for MPC55X, MPC56X is more stable in this version.
A big list of Ecus have been added in this version. We also add Factory mode to some Ecus they are already in Hexprog supported list. New Ecus: Alfa Romeo: Bosch EDC16C39 Audi: Bosch EDC16C4 BMW: Bosch ME9 Buick: Bosch EDC16C39 Chevrolet: Bosch EDC16C39, EDC16C9 Chrysler: Bosch EDC16C2 Citroen: Bosch EDC16C34, EDC16CP39 Daewoo: Bosch EDC16C39 Effedi:…
More Ecu ISN are supported in version 1.0.62, and more features are available. Added support for flashing/coding of latest BMW models (2021). Added ISN read for G series DDE: DDE802L and DDE803S. ISN for EDMEI1 is supported for all versions including the latest version. Flash Data and Coding data has been updated in this version. Search feature for manual…
More Ecus from MDG1 are avialble in this version, we also improved the new user intrface for Ecu cloning/Chip tuning for old versions of Windows 7. Improved the EEPROM Erase function to be more reliable and faster. Added Citroen Bosch MD1CS003 Added Dacia Bosch MD1CS006 Added Hyundai Kefico CPGDSH1.26.X Added Mercedes Benz Bosch MD1CS006 Added Opel…
We fixed an important bug came in version 1.0.26 for SPC5777 Ecus (hexprog can read, but cannot write sometimes). We also added new Ecus for Ecu cloning/ chip tuning: Audi:SIMOS 18.6 and 18.4 Citroen: Bosch EDC16C39 Mercedes-Benz:ME2.8 Renault: Bosch EDC16C41 Volkswagen: SIMOS 18.6 and 18.4
This update brings a new user interface to Hexprog users. It adds more features to make it eaier for using the software such sorting the lists as well as search of Ecus based on part number, users have the option to chose between the old user interface and the new one. More supported EEPROMs in…
Checksum correction is the main improvement in this release. Hextag is now ready to support tuners from A to Z. We also added many new Ecus for cloning/tuning. Checksum correction has been added in this version. Hexprog will correct checksum on the fly while writing for most of Ecus. Options to control the Checksum process,…
100+ Ecus added in this version, most of them are those have MPC5XX MCUs like EDC16X and ME9X/MEV9X. In this version we corrected some issues reported by Hextag users like some Ecus with ST10 result a “Timeout Error”, Continental SIMOS 18 unlock, Ford Continental SID209, … and we added more Tricore Ecus too. We added a…
Autohex II version 1.0.61 added more features to the software, now users have the ability to serve the newest models of BMW. Faulty BDC2_Gateway and BDC3_Gateway will be repaired while Autohex is calculating vehicle order. Autohex will initialize Flexray automatically in the new BDC3_Gateway. Security Access problem in some Ecus in newest BMW models (2019,…
This update adds more Ecus to read/write ISN by Factory mode, also more models are supported. BMW I series has been added in this version, users can diagnose, program, encode and do other functions like BDC replacment, adding keys,..etc. Flashing data has been updated for F and G series, and coding for G series has…
Hextag got more and more Ecus to support users, we have added new Ecus for different brands. We also added more BSI/BCM modules for locksmith/replacment jobs: Added following for Audi: Bosch MD1CS004,Continental Simos 12.1,Simos 12.2 (Boot and Factory mode) Added following for Mercedes Benz: Continental SID307 and SID310 Added following for Porsche: Continental SDI21.1, SDI21.2…
In this version we added more Continental Ecus for Nissan, Renault, Opel and Dacia: Added following for Dacia:Continental EMS3110 Added following for Nissan:Continental SID307,SID309,SID310 Added following for Opel:Continental SID309,SID310 Added following for Porsche:Continental Simos 18.10 Added following for Renault:Continental SID307,SID309,SID310 Fixed Unlocking some versions of SIMOS18.XX
Hextag/Hexprog software now has 56 more Ecus in the cloning list. In this release Hextag extends the supported Micro-controllers, it is able to read/write Ecus with ST10. Added following for Alfa Romeo:Bosch MED7.1.1,MED7.6.2 Added following for Audi:Bosch ME7.1,ME7.1.1,ME7.1.5,ME7.5,ME7.5.5,MED17.1.27,MED17.1.61,MED17.1.62 Added new brand Baic and following ECU’s:Bosch ME7.8.8 Added following for Bentley:Bosch ME7.1.1 Added following for BMW:Bosch ME7.2…
Hextag/Hexprog software now has more Ecus in the cloning list. Added following to Audi: MG1CS002, MD1CP004, MD1CP014 Factory Mode. Added following to ISUZU: EDC17C83 Factory Mode. Added following to Mclaren: ME17.8.33 Factory Mode. Added following to VW MG1CS002, MD1CP004, MD1CP014 Factory Mode. Optimized the new Power Module to work perfectly with Hextag Tool.
We still focus on Continental Ecus this time. In this update Hextag users have extra Ecus in the cloning list. Added following for Peugeot: Continental SID208 Factory and Boot Mode. Added following for Ford: Continental SID211. Added following for Hyundai: Bosch EDC17C57, MED17.9.30, MEG17.9.2. Added following for Citroen: Continental SID208 Factory and Boot Mode. Added following for Kia:…
This update adds very important Ecus to Autohex ISN list, mainly the MDG1 ISN Ecus using the factory mode. Read ISN of: DME_83T1, DDE803, DME88T0, DDE803P, DME_88T0, DME_84T0 for F and G series without opening Ecu. Read/Write ISN of: DME841H, DME861, DME841, DME_860, DME_840, DDE832C, DME_840H for F and G series without opening Ecu. Autohex…
Hextag/Hexprog software now has 36 more Ecus in the cloning list, we focused on the new generation of Ecus MDG1. We also made it possible to read/write and clone MSV80, MSD80, MSD85,… by Factory mode. Added following for Audi:Bosch MD1CP004,MG1CS001,MG1CS002,MG1CS011,Continental Simos 18.4 Added following for Bentley: Bosch MG1CS002 ,MG1CS008 Added following for BMW: Bosch MD1CS001,MD1CS001,MG1CS003,MG1CS201 Added factory mode feature…
Autohex II BMW Diagnostic software update is available for Autohex BMW users Flashing data has been updated for F and G series Coding data has been updated for F and G Series New G series models are supported like: G05, G14,G20,G83,… New F seRies models are supported like: F40, F42, F44, F91,… Fixed the FA calculation…
Hextag/Hexprog software now has 32 more Ecus in the cloning list added on 8 different models, we focused in this time on Toyota Ecus. We also enhanced the TPROT protocol (different versions) for different types of Ecus especially in VW, Audi, SKODA and Seat. Added new brand Dacia and following ECU :EDC17CP17 Added new brand Toyota…
Hextag/Hexprog software now has 19 more Ecus in the cloning list added on 13 different models, we also made the factory mode more reilable in initializing, as well as fixing minore issues. Added new brand Dacia and following ECU’s : EDC17C42,EDC17C84,Continental EMS3110,SID305 Added new brand Mahindra and following ECU’s: EDC17C55,EDC17C63,EDC17CP55 Added new brand Jac and following…
42 more Ecus come to HexProg in version 1.0.13, we also enhanced some features in this version: Added following for Alfa Romeo: EDC17C69, MED17.3.5 Added following for Aston Martin: ME17.8.31 Added following for Audi: EDC17CP24, EDC17CP24 Added following for Bentley: ME17.1.1 Added following for BMW: MEV17.4.6 Added following for Citroen: EDC17CP11 Added following for Dodge:…
Autohex II BMW Diagnostic software update is available for Autohex BMW users CAS4 Unlock by OBD, with this function you can make a new key, delete akey, change CAS ISN, change CAS VIN,..etc EGS 6HP EWS Reset for BMW F series can be done in few seconds. More supported Ecus in ISN Factory mode like MEVD17.23,…
More supported Ecus come to HexProg in version 1.0.12, we also corrected some minor issues in this version. Mercedes Benz Delphi CRD3X, CRD3S2, CRD3E1, CRD3PX Ecus are supported starting from this version. MINI MEV17.2.2 (Boot mode only) is supported in this version. Audi/VW EDC17CP04, EDC17CP14, EDC17C46 are supported in this version. Opel EDC17C19 is supported…
Hexprog software version 1.0.11 is available for Hextag tool users with more Ecus to clone. Audi/VW SIMOS 18.0, 18.1, 18.2 are supported in this version. Audi/VW MED17.1 is supported in this version. Ford SID807 is supported in this version. Peugeot/Citroen EDC17C10 is supported in this version. From this version on, we start adding more user friendly…
Thanks to all users who helped us by providing feedbacks about the new Ecu cloning function. HexProg version 1.0.10 has been released today with following changes: Power supply monitor is less restrictive in this version. BMW EDC17CP09 has been added in this version. MSV90, MSD85 Ecus are working prefectly in this version. Ecu Support List…
Hexprog software version 1.0.8 is available for Hextag tool users with new amazing featurs. HexProg can clone Ecus, It’s free for all users during 2019, any user has Hextag can start using this function now. Porsche BCM 1N35H is more stable now EEPROM unlock function has been improved Audi key reset for ATJ807 is supported in this…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. ISN Factory mode for MEV1723 DME (MINI and F series) has been added in this version. EGS EWS Reset function is able to support more versions of EGS in F and G series. USB Driver has been upgraded to support latest versions of…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. ISN Factory mode is available in this version. With this function you can read/write ISN in DME and DDE besides to modify the working hours without opening the DME/DDE. We are happy to announce that Autohex II is the only tool that supports this feature.…
Hexprog software version 1.0.6 is available for Hextag tool users. More Porsche keys added in HexProg Key renew list. Fixed EROM/EEPROM data for BMW VDO 868 MHz. M35080XX EEPROM chip now is fully supported for all parts and versions Key test function added to test renewed keys. An option to write E-EEPROM for damaged FRM is…
Hexprog software version 1.0.5 is available for Hextag tool users. Land Rover new BCM read/write is available in this version of HexProg. Nissan, Infiniti and Renault BCM read/write is available in this version of HexProg Key renew for many brands: Audi, Cadilac, Dacia, Hyundai, Kia, Land Rover, Maserati, Peugeot, Renault and Volvo is available. Users can…
Hexprog software version 1.0.4 is available for Hextag and hexprog tool users. Key renew function for NXP PCF chips family is available in this version for BMW, MINI and Porsche. HexProg now solved the problem of FEM/BDC keys 434 MHz. Users with Production 1.50 they require HP 04-01 module for this function. EEPROM Read/Write of different types…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. A new function for replacing FEM/BDC (including key transferring from original to donor) is available in this version, users can use this function from CAS replacment. Deleting keys from CAS4,CAS4+ FEM and BDC is available in this version, users can use this function…
Hexprog software First release after BETA is available for Hextag and hexprog tool users. New MCUs are supported like RENESAS V850 Family from NEC and HC08 Family from MOTOROLA/FREESCALE Added Porsche BCM 2011 and up, users can read/write data without removing any part. Added Audi/VW BCM for different modules: ESL J518 and BCM 2 with Renesas…
Hexprog software (BETA) update is available for Hextag and hexprog tool users. Added FRM repair for BMW FRM in E series, this function will repair the corrupted EEPROM automatically Added new modeuls for BMW cars: SZL, SM, KBM Added a module for Mercedes benz: EIZ for 211 chassis Improved the performance of the software and fixing…
A major improvment in F/G series ENET programming especially in MOST network modules like HU_NBT, HU_ENTRY, HU_CIC, KOMBI, DKOMBI,…etc. Users can be confident in programming these modules and in a 3 times shorter time than old4er versions of Autohex II. Correcting the FA calculation in new models (some models in 2017 and up), no more…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. Update flashing and coding for F and G series FA manager enhanced, now users can copy backup FA from KOMBI, REM, or CAS to ZGW,FEM_GATEWAY, BDC_GATEWAY,… Update the programming IDE (integrated development environment) for Autohex II, users must uninstall older version and install…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. Read/Write ISN from BMW F series: MSD85, MSD87, MSV90. As well as older generation (E series) MSD80, MSD81 and MSD85. Rewriting the G series coding functions from scratch, all known issues in BMW G series coding were fixed. Enhancing FEM/BDC unlocking: Sometimes Autohex…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. First tool in the world that can read ISN, write ISN and reset working hours for MEV1723 and EDC17C76. Ecu Update option for FEM/BDC unlocking function to enable users that don’t have the programming feature to do update. Fixing the problem in some…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. Fixed problems in ENET protocol when the Ecu has a big flash Data like HU_NBT. Enhanced Programming when using ENET protocol. Enhanced the procedure of FEM/BDC unlock.
Autohex II BMW Diagnostic software update is available for Autohex BMW users. Added following models for coding and programming: F23, F88, F90, F97, F98, G01, G02, G08, G11, G12, G13, G30, G31, G32, G38. Mileage reset for FEM and BDC is available from Unlocking Function (see picture). ISN can be written in FEM and BDC…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. Solving the case when unlcoking FEM/BDC on Bench when Ignition ON is required. Autohex II can detect ZGW or FEM/BDC Gateway if it is in programming mode, it will flash it automatically to access FA data. Solving the case when updating FEM sometimes…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. Advanced option is available in the FEM/BDC Unlock function. ENET Protocol (for Autohex HW4) has been improved to work better with MOST network Ecus like HU_NBT, CIC, KOMBI,…etc Corrected some bugs in ENET programming.
Autohex II BMW Diagnostic software update is available for Autohex BMW users. BMW BDC and FEM software has been enhanced in this version to be more stable. BDC and FEM Changing VIN, and reading DME ISN, with this added features Autohex II users can replace the BDC and FEM with a second hand. More…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. BDC and FEM key programming is ready for Autohex II HW4. The function can be executed from CAS Firmware, it will generate a secret info file, then it will return the BDC/FEM back to exactly the original state. Autohex II BMW users…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. Manual coding for F series is available in this version. Enahnced USB driver for a better performance in F series flashing. BMW F series 8HP EWS Reset is ready to be used by all users.
Autohex II BMW Diagnostic software update is available for Autohex BMW users. Updating Ecu programming and Ecu coding for F series Adding more DME ISN read/write by OBD for F series Fixing a problem while flashing some EGS part numbers in E series (E65) Optimized F series programming.
Autohex II BMW Diagnostic software update is available for Autohex BMW users. On Bench Functions: ISN Manager, CAS Firmware, Key Programming, FA manager, and Read/Erase Fault codes are available now, users don’t need a valid FA to use these functions. More F series ISN can be retrieved by OBD in this version (more for Europe,…
Autohex II BMW software version 1.0.24 is available for Autohex II users. ECU Programming in E series data has been updated CAS Firmware function has updated to work with CAS3+ last versions Communication with OBD II has enhanced