Hextag/Hexprog software now has 19 more Ecus in the cloning list added on 13 different models, we also made the factory mode more reilable in initializing, as well as fixing minore issues. Added new brand Dacia and following ECU’s : EDC17C42,EDC17C84,Continental EMS3110,SID305 Added new brand Mahindra and following ECU’s: EDC17C55,EDC17C63,EDC17CP55 Added new brand Jac and following…
Hextag/Hexprog software now has 32 more Ecus in the cloning list added on 8 different models, we focused in this time on Toyota Ecus. We also enhanced the TPROT protocol (different versions) for different types of Ecus especially in VW, Audi, SKODA and Seat. Added new brand Dacia and following ECU :EDC17CP17 Added new brand Toyota…
Autohex II BMW Diagnostic software update is available for Autohex BMW users Flashing data has been updated for F and G series Coding data has been updated for F and G Series New G series models are supported like: G05, G14,G20,G83,… New F seRies models are supported like: F40, F42, F44, F91,… Fixed the FA calculation…
Hextag/Hexprog software now has 36 more Ecus in the cloning list, we focused on the new generation of Ecus MDG1. We also made it possible to read/write and clone MSV80, MSD80, MSD85,… by Factory mode. Added following for Audi:Bosch MD1CP004,MG1CS001,MG1CS002,MG1CS011,Continental Simos 18.4 Added following for Bentley: Bosch MG1CS002 ,MG1CS008 Added following for BMW: Bosch MD1CS001,MD1CS001,MG1CS003,MG1CS201 Added factory mode feature…
This update adds very important Ecus to Autohex ISN list, mainly the MDG1 ISN Ecus using the factory mode. Read ISN of: DME_83T1, DDE803, DME88T0, DDE803P, DME_88T0, DME_84T0 for F and G series without opening Ecu. Read/Write ISN of: DME841H, DME861, DME841, DME_860, DME_840, DDE832C, DME_840H for F and G series without opening Ecu. Autohex…
We still focus on Continental Ecus this time. In this update Hextag users have extra Ecus in the cloning list. Added following for Peugeot: Continental SID208 Factory and Boot Mode. Added following for Ford: Continental SID211. Added following for Hyundai: Bosch EDC17C57, MED17.9.30, MEG17.9.2. Added following for Citroen: Continental SID208 Factory and Boot Mode. Added following for Kia:…
Hextag/Hexprog software now has more Ecus in the cloning list. Added following to Audi: MG1CS002, MD1CP004, MD1CP014 Factory Mode. Added following to ISUZU: EDC17C83 Factory Mode. Added following to Mclaren: ME17.8.33 Factory Mode. Added following to VW MG1CS002, MD1CP004, MD1CP014 Factory Mode. Optimized the new Power Module to work perfectly with Hextag Tool.
Hextag/Hexprog software now has 56 more Ecus in the cloning list. In this release Hextag extends the supported Micro-controllers, it is able to read/write Ecus with ST10. Added following for Alfa Romeo:Bosch MED7.1.1,MED7.6.2 Added following for Audi:Bosch ME7.1,ME7.1.1,ME7.1.5,ME7.5,ME7.5.5,MED17.1.27,MED17.1.61,MED17.1.62 Added new brand Baic and following ECU’s:Bosch ME7.8.8 Added following for Bentley:Bosch ME7.1.1 Added following for BMW:Bosch ME7.2…
In this version we added more Continental Ecus for Nissan, Renault, Opel and Dacia: Added following for Dacia:Continental EMS3110 Added following for Nissan:Continental SID307,SID309,SID310 Added following for Opel:Continental SID309,SID310 Added following for Porsche:Continental Simos 18.10 Added following for Renault:Continental SID307,SID309,SID310 Fixed Unlocking some versions of SIMOS18.XX
Hextag got more and more Ecus to support users, we have added new Ecus for different brands. We also added more BSI/BCM modules for locksmith/replacment jobs: Added following for Audi: Bosch MD1CS004,Continental Simos 12.1,Simos 12.2 (Boot and Factory mode) Added following for Mercedes Benz: Continental SID307 and SID310 Added following for Porsche: Continental SDI21.1, SDI21.2…