Autohex II BMW Diagnostic software update is available for Autohex BMW users. Added following models for coding and programming: F23, F88, F90, F97, F98, G01, G02, G08, G11, G12, G13, G30, G31, G32, G38. Mileage reset for FEM and BDC is available from Unlocking Function (see picture). ISN can be written in FEM and BDC…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. Fixed problems in ENET protocol when the Ecu has a big flash Data like HU_NBT. Enhanced Programming when using ENET protocol. Enhanced the procedure of FEM/BDC unlock.
Autohex II BMW Diagnostic software update is available for Autohex BMW users. First tool in the world that can read ISN, write ISN and reset working hours for MEV1723 and EDC17C76. Ecu Update option for FEM/BDC unlocking function to enable users that don’t have the programming feature to do update. Fixing the problem in some…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. Read/Write ISN from BMW F series: MSD85, MSD87, MSV90. As well as older generation (E series) MSD80, MSD81 and MSD85. Rewriting the G series coding functions from scratch, all known issues in BMW G series coding were fixed. Enhancing FEM/BDC unlocking: Sometimes Autohex…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. Update flashing and coding for F and G series FA manager enhanced, now users can copy backup FA from KOMBI, REM, or CAS to ZGW,FEM_GATEWAY, BDC_GATEWAY,… Update the programming IDE (integrated development environment) for Autohex II, users must uninstall older version and install…
A major improvment in F/G series ENET programming especially in MOST network modules like HU_NBT, HU_ENTRY, HU_CIC, KOMBI, DKOMBI,…etc. Users can be confident in programming these modules and in a 3 times shorter time than old4er versions of Autohex II. Correcting the FA calculation in new models (some models in 2017 and up), no more…
Hexprog software (BETA) update is available for Hextag and hexprog tool users. Added FRM repair for BMW FRM in E series, this function will repair the corrupted EEPROM automatically Added new modeuls for BMW cars: SZL, SM, KBM Added a module for Mercedes benz: EIZ for 211 chassis Improved the performance of the software and fixing…
Hexprog software First release after BETA is available for Hextag and hexprog tool users. New MCUs are supported like RENESAS V850 Family from NEC and HC08 Family from MOTOROLA/FREESCALE Added Porsche BCM 2011 and up, users can read/write data without removing any part. Added Audi/VW BCM for different modules: ESL J518 and BCM 2 with Renesas…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. A new function for replacing FEM/BDC (including key transferring from original to donor) is available in this version, users can use this function from CAS replacment. Deleting keys from CAS4,CAS4+ FEM and BDC is available in this version, users can use this function…
Hexprog software version 1.0.4 is available for Hextag and hexprog tool users. Key renew function for NXP PCF chips family is available in this version for BMW, MINI and Porsche. HexProg now solved the problem of FEM/BDC keys 434 MHz. Users with Production 1.50 they require HP 04-01 module for this function. EEPROM Read/Write of different types…