Got a F20 and the instrument cluster was damaged due to being tampered. Used Autohex to program the latest software back to the cluster. After programming it coded the instrument cluster. The cluster came back to life immediately, all functions were tested and worked fine.
Got a water damaged DME. Client supplied a used ecu with same part number , including the CAS3 and key. This ecu has a tricore processor, extracting the ISN was done on the bench using Autohex. Once the ISN was extracted from the DME the file was saved , it was written to the CAS3.…
The Autohex HW4 is launching this month. Features include : ETHERNET PROTOCOL (DoIP) FEM and BDC Security Unlock
Autohex II BMW Diagnostic software update is available for Autohex BMW users. On Bench Functions: ISN Manager, CAS Firmware, Key Programming, FA manager, and Read/Erase Fault codes are available now, users don’t need a valid FA to use these functions. More F series ISN can be retrieved by OBD in this version (more for Europe,…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. Updating Ecu programming and Ecu coding for F series Adding more DME ISN read/write by OBD for F series Fixing a problem while flashing some EGS part numbers in E series (E65) Optimized F series programming.
Autohex II BMW Diagnostic software update is available for Autohex BMW users. Manual coding for F series is available in this version. Enahnced USB driver for a better performance in F series flashing. BMW F series 8HP EWS Reset is ready to be used by all users.
Autohex II BMW Diagnostic software update is available for Autohex BMW users. BDC and FEM key programming is ready for Autohex II HW4. The function can be executed from CAS Firmware, it will generate a secret info file, then it will return the BDC/FEM back to exactly the original state. Autohex II BMW users…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. BMW BDC and FEM software has been enhanced in this version to be more stable. BDC and FEM Changing VIN, and reading DME ISN, with this added features Autohex II users can replace the BDC and FEM with a second hand. More…
Autohex II BMW Diagnostic software update is available for Autohex BMW users. Advanced option is available in the FEM/BDC Unlock function. ENET Protocol (for Autohex HW4) has been improved to work better with MOST network Ecus like HU_NBT, CIC, KOMBI,…etc Corrected some bugs in ENET programming.
Autohex II BMW Diagnostic software update is available for Autohex BMW users. Solving the case when unlcoking FEM/BDC on Bench when Ignition ON is required. Autohex II can detect ZGW or FEM/BDC Gateway if it is in programming mode, it will flash it automatically to access FA data. Solving the case when updating FEM sometimes…