BMW F – 3 Series New Instrument Cluster Fitting and Coding
Fit programmed and coded new instrument cluster as the old one had been damaged by jump starting. The Autohex determined the correct software and downloaded from the server .
BMW F30 Adaptive Lights Error
Got a F30 with stepper motor issues for the adaptive lights. Used Autohex to remove the adaptive lights in the vehicle order , then coded FEM body.
BMW MSD 80 DME ISN Extraction
Extracted ISN from a second hand engine ecu. MSD80 on the bench using the Autohex. Simply wire up cas and dme and read ISN from the DME and write it back to the cas. It would be a good idea to update the DME software to have the latest version, it will also correct the…
BMW F30 FLE Light Coding
Got a new F30 for light coding as a new frontright was fitted. Autohex detected the latest software online and programmed the FLE software. After coding the light was fully functional.
BMW F20 Instrument Cluster Restore
Got a F20 and the instrument cluster was damaged due to being tampered. Used Autohex to program the latest software back to the cluster. After programming it coded the instrument cluster. The cluster came back to life immediately, all functions were tested and worked fine.
BMW 118i MSD81 Ecu Swap
Got a water damaged DME. Client supplied a used ecu with same part number , including the CAS3 and key. This ecu has a tricore processor, extracting the ISN was done on the bench using Autohex. Once the ISN was extracted from the DME the file was saved , it was written to the CAS3.…
Autohex HW4
The Autohex HW4 is launching this month. Features include : ETHERNET PROTOCOL (DoIP) FEM and BDC Security Unlock
AutoHex II Software For BMW Version 1.0.24
Autohex II BMW software version 1.0.24 is available for Autohex II users. ECU Programming in E series data has been updated CAS Firmware function has updated to work with CAS3+ last versions Communication with OBD II has enhanced